Online Support
Access our support system where you can contact our support team, register your product, obtain warranty service and more!

If you're having any problems with your device or need to request a refund, please register a support case and you should receive a reply within 24 hours.

How to recover Popcorn Hour A-410 from firmware update failure with fail-safe kernel?
Article ID   1163
Type   Downloads
Last Updated   2/5/2014
Products   A-410
 Follow these instructions to recover the Popcorn Hour A-410 if the firmware update fails.

This method is only applicable for the Popcorn Hour A-410.

1. Download the following zip file:
2. After unzipping the archieve, please rename a410-update.bin to recovery-image.bin
2. Copy recovery-image.bin file into the root of a USB thumbdrive (must be format to FAT32 or NTFS file system only).
3. Connect the Popcorn Hour A-410 to a TV through the Component or Composite or HDMI outputs.
4. Power up the Popcorn Hour A-410.
5. Component or Composite or HDMI video will display blue background with "Firmware recovery. Please insert USB"
6. Plug the USB thumbdrive into the Popcorn Hour A-410 USB port to start the recovery process.
7. After successful recovery, power cycle will bring it up again to 05-04-131018-25-POP-425-000 firmware.

If steps 1 - 7 stated above fail, follow these instructions:

A. Power down the Popcorn Hour A-410.
B. Insert a jumper on uart0 (see for exact location)
C. Plug the same USB thumbdrive with the same bin files into the Popcorn Hour A-410 USB port and the same component or composite or HDMI cables into the Popcorn Hour A-410 and TV. If these cables have not been removed since you followed steps 1-7, just leave them plugged in.
D. Power up the Popcorn Hour A-410
E. Follow steps number 5-7 above.
F. After the update process completed, power down the unit when the screen showing a message "rebooting in 10 seconds"
G. Remove the jumper.
H. Remove USB thumbdrive, component and/or composite cables.
I. Your Popcorn Hour will is now using 05-04-131018-25-POP-425-000 firmware.
J. Plug in desired connectors (HDMI, Component, Network, optical, etc.) and pat yourself on the back for successfully fixing your Popcorn Hour A-410.