Online Support
Access our support system where you can contact our support team, register your product, obtain warranty service and more!

If you're having any problems with your device or need to request a refund, please register a support case and you should receive a reply within 24 hours.

How to recover Popcorn Hour A-500 Pro-U from firmware update failure?
  Print 
Article ID   1174
Type   FAQ
Last Updated   12/29/2016
Products   A-500 Pro-U
Follow these instructions to recover the Popcorn Hour A-500 Pro-U if the firmware update fails.

This method is only applicable for the Popcorn Hour A-500 Pro-U.

1. Download the following zip file:
http://files.syabas.com/popcornhour/download/01-01-160503-25-POP-431-800-recovery-image.zip
2. Unzipping the archive to recovery-image.bin
2. Copy recovery-image.bin file into the root of a USB thumbdrive (must be format to FAT32 or NTFS file system only).
3. Connect the Popcorn Hour A-500 Pro-U to a TV through the HDMI output.
4. Power up the Popcorn Hour A-500 Pro-U.
5. HDMI video will display blue background with "Firmware recovery. Please insert USB"
6. Plug the USB thumbdrive into the Popcorn Hour A-500 Pro-U USB port to start the recovery process.
7. After successful recovery, power cycle will bring it up again to 01-01-160503-25-POP-431-800 firmware.

If steps 1 - 7 stated above fail, follow these instructions:

A. Power down the Popcorn Hour A-500 Pro-U.
B. Insert a jumper as shown below



C. Plug the same HDMI cable into the Popcorn Hour A-500 Pro-U and TV. If this cable has not been removed since you followed steps 1-7, just leave it plugged in.
D. Power up the Popcorn Hour A-500 Pro-U
E. Remove the jumper when A-500 PRO logo just appear on screen. Later, you will see HDMI video display blue background with "Updating Firmware. Please insert USB"
F. Follow steps number 6-7 above.
G. After the update process completed, power down the unit when the screen showing a message "rebooting in 10 seconds"
H. Remove USB thumbdrive.
I. Your Popcorn Hour A-500 Pro-U will is now using 01-01-160503-25-POP-431-800 firmware.
J. Plug in desired connectors (HDMI, Network, Optical, etc.) and pat yourself on the back for successfully fixing your Popcorn Hour A-500 Pro-U.

Note: If firmware update stuck at "Formatting" stage for more than 1 minute, try reboot the device and perform the recovery again WITHOUT jumper now.