Online Support
Access our support system where you can contact our support team, register your product, obtain warranty service and more!

If you're having any problems with your device or need to request a refund, please register a support case and you should receive a reply within 24 hours.

Popcorn Hour A-500/A-500U Main Board Removal Guide
Article ID   1172
Type   FAQ
Last Updated   8/3/2016
Products   A-500, A-500U
What do you need?

1) A-500/A-500U
2) Philips head type screw driver

Step 1:

Remove the HDD tray and  HDD (if you have installed HDD) from casing


Step 2:

Remove only 4 screws shown below from the bottom of the casing

Step 3:

Remove all 5 screws located at back panel

Step 4:

Remove the main casing by sliding out the bottom plate and board

Step 5:

Remove the back panel from the board

Step 6:

Remove all 4 screws located on the board in order to detach the bottom plate later

Step 7:

Remove bottom plate from the board

Step 8:

Remove only 4 screws shown below from the board in order to remove HDD tray's frame later

Step 9:

Remove the HDD tray's frame from the board